Showing posts with label Rogue One. Show all posts
Showing posts with label Rogue One. Show all posts

25/02/2017

Turbolaser

I tend to have a problem wherein I build things that are bigger than I really need and this is no exception. It's a turbolaser from the Star Wars universe.

It's not film accurate because if it were I'd still be making it but it's supposed to be a smaller version, hence the single barrel.

The main construction was from some scrap 5mm acrylic sheet from work (a dodgy colour that won't get used for anything) then clad in 1mm styrene sheet with gubbins added to taste. It stands about 550mm tall and is around 180mm square at the base. The three parts are separate ans the top can rotate but unfortunately the gun barrel doesn't go up and down which was a slight mistake on my part (gluing it a bit too well).

It's undercoated but still needs weathering etc before it'll be complete.I'm also going to look at doing a slightly different top that's been converted into a flight control centre so it could be used in our games in Mos Vegas as space traffic control :-)

















ttfn

23/02/2017

Scarif

Continuing the Star Wars theme and the fact that I really, really love Rogue One I decided to make some Scarif terrain.

Basically using the Maldives for inspiration (as that's where it was filmed) and utilising some old palm trees from work I got going.

The bases are 2mm hardboard with chamferd edges and then coated in fine sand (pretty much the same method as my other Star Wars terrain), painted with textured wall paint and then washed with watered down brown ink.

The growies are a selection of whatever I had at the time but I'll have to buy some more if I'm to make other bits (which I no doubt will do). There's enough room between the separate foliage clusters to get figures through.

The larger rocks were carved from blue foam, sanded down and then given a liberal coating of the textured wall paint. Small pebbles were used around the edges. They were then sprayed with a mix of greys from light to dark from the top down and washed with a black/brown ink, again from the top down. The base process was then applied and a couple of choice bits of vegetation were added.










I will at some point soon be making a simple landing pad and bunker entrance similar to the one in the film. Watch this space..

ttfn